Electroforming design guideline: available processes

At Veco we offer 3 types of Electroforming: Electroforming Overgrowth, Electroforming Thickresist, and Surface Replication with Electroforming.

(1) plating defined Electroforming: the Overgrowth method

Plating defined electroforming is also referred to as an overgrowth method.

Electroforming design guideline - overgrowth
It uses a thin photoresist pattern to shield parts of the conductive substrate. A light-sensitive coating is applied to the conductive surface. By a photolithographic process a pattern is made in the coating, resulting in conducting and non conducting areas. Metal grows over the photoresist and the thickness of the product (T) exceeds the thickness of the photoresist (TR), hence the process is also known as overgrowth.

(2) photo defined Electroforming: the Thick Resist method

Photo defined electroforming is also called the thick resist method.
Electroforming design guideline - thick resist
In some cases, it is desired to use the thick resist method. A thick pattern of photoresist is used during photo defined growth, such that the thickness of the product (T) does not exceed the thickness of the photoresist (TR).

Aspect ratios (TR/ WR) up to 1 can generally be achieved with ease. The exact limits depend on the size and geometry of the products .

(3) surface replication with Electroforming

The electroforming process allows for extremely precise duplication of the mandrel. The high resolution of the conductive patterned substrate allows finer geometries, tighter tolerances, and superior edge definition.

This results in perfect process control, high-quality production and very high repeatability.
Electroforming is therefore perfectly suitable for high precision surface replication at low cost and in high volumes.

Electroforming design guideline: material properties


See below an overview of materials available for the Electroforming process
The materials we offer for electroforming are Nickel and Copper. Whereas we have a variety of nickel types available:

  • Veco84
  • Sulfamate
  • Meta
  • Hr-Ni
  • PdNi (Biocompatible)

material properties

1 Tensile strength, yield strength, elasticity and elongation at failure are measured in flat tensile tests on ASTM D638 type 4 samples (thickness 75-100 µm) according to ISO 6892-1:2016 with an initial gauge length of 25 mm.
2 Stainless steel samples SS316L and SS304 are added as reference, but note that identical stainless steel types can be ordered with varying tensile properties; the measured values do not reflect the maximum capability of stainless steel 316L and 304.
3 The Vickers hardness as measured on polished cross sections with a force of 0.981 N (100p).
4 Measured at 32 °C with a vibrating-sample magnetometer.
5 Ni purity with respect to the elements Ag, Al, As, Ca, Cd, Ce, Co, Er, Eu, Ga, Gd, Ge, Hg, Ho, La, Mg, Mo, Nb, Pb, S, Si, Sn, Sr, Ti, Tm, U, Y, Zn, Zr. Based on qualitative and quantitative trace level analyses with inductively coupled plasma emission spectrometry after material dissolution in HNO3 with a final Ni concentration of ca. 1 g/L and a final HNO3 concentration of ca. 10-14 v%.
6 The Ni leaching in the standardized testing procedure for sugar sieves, i.e. leaching from 1.00 dm2 sample surface area in 170 mL DIN10531 artificial tap water at 70 °C during 24 h. All materials fulfilled the requirement of <0.14 mg Ni leaching per kg test fluid as determined for food contact applications by the European Directorate for the Quality of Medicines & HealthCare (Technical guide on metals and alloys used in food contact materials, 1st edition September 2013).
7 Temperature at which the material can be kept for 1 h while maintaining HV≥95% and Rm≥95%. Thermal treatments were done in air with instantaneous heating and cooling.
8 Measured with a four-point probe under a current of 1.000 A and at ca. 35 °C.

co-develop with Veco
talk to an engineer and explore possibilities of our technology and how it can benefit your next innovation
talk to an engineer